Greenhouse called "Zucchini" is used for growing small plants.
These include onions, tomatoes, zucchini and many others.
Such devices easy to assemble, installation does not even need additional equipment.
Specifications
The basis of the frame is a profile made of metal. Its dimensions are 25x25 mm. This provides the entire structure with two parameters:
- strength;
- rigidity.
On the production of frame painted with paint Tecnos from Finland. It does not contain lead, can not fade in the sun and it has special certificates.
Also a greenhouse has on both sides lifting walls with stops. Thanks to this approach, it becomes much easier to water and care for seedlings.
If the "Zucchini" disassembled, then it will consist of:
- welded frames (end frames);
- straight parts, the length of which is two meters.
A photo
A selection of detailed photos of the Kabachok greenhouse:
What plants can be grown
Novice gardeners wonder: "What can be grown in the greenhouse" Zucchini "?". Under polycarbonate, such crops will grow very well, such as:
- zucchini;
- bow;
- salad;
- tomato;
- carrots, etc.
IMPORTANT! Growing takes place in summer and early autumn. In winter, planting something is not recommended, especially in cold regions.
disadvantages
Minuses at the greenhouse "Zucchini" a little, however, and they need to know:
- Loss of sunlight. For plants it is very important to get enough natural sunlight. However, arched structures do not allow the light to fully penetrate the greenhouse.
- Transparency through. The walls are transparent both from the south and from the north. However, this drawback is completely eliminated.
Make a greenhouse "Zucchini" out of polycarbonate do it yourself
You want to build a structure yourself? In this case, you must first select the place where the greenhouse will stand.
It is recommended to use as a basis. concrete foundation. Then draw the drawings for which you will collect it.
Focus on making a greenhouse of cellular polycarbonate.
Assembly instructions are as follows:
- When attaching polycarbonate sheets need to be oriented with a protective layer outwards. If this is not observed, then the greenhouse will significantly decrease its service life. When you lay the sheets, be sure to remove the protective film.
- When installing the polycarbonate cell must be placed vertically.
- Before you install the ends of the sheets, free them from packing.
- The sheets are attached roofing screws with a diameter of five millimeters. Between them there should be a distance of 500 - 800 millimeters. It depends on the thickness of the sheet.
Greenhouse "Zucchini" has both advantages and disadvantages. However, the latter with skillful approach turn into advantages. Install yourself such a structure not difficult.
